The new Woojer application comes bundled with a FOTA (Firmware over the air) update system. This means that by using the dedicated app, you can easily verify that your Woojer is running the latest Firmware version and that it is fully updated.
During the initial association process with the app, along with any subsequent application start, the app will communicate with our servers to cross-check and compare your Woojer's firmware version. If the app detects that your Woojer is running an older firmware version, it will prompt you to perform a firmware update and provide you with the necessary instructions on how to proceed.
If the application did not automatically prompt you to upgrade the firmware of your Woojer, you can check out the following guide to learn how to update the Firmware:
- Make sure your Woojer is already associated with the application. You can learn how to associate Woojer with the application through this article.
- From the app home screen, press on the burger menu on the top left to access the application settings.
- In the settings screen, select the "My Woojer" option.
- Under the "Woojer Details" pane you will be able to see your Woojer's model name, battery status, and firmware version. If you're running older firmware, the firmware version will also have an "Update" button displayed.
- After pressing the "Update" button, you will be moved to the firmware update screen, where you will be prompted to initiate the firmware update. Make sure your Woojer is connected to a compatible power source for the firmware update process.
On the Woojer Vest 3, make sure to charge the Vest using the USB-C port located on its back.
