Congratulations! You've received your Woojer Strap 3!
Please review the following information carefully before the first use of your Woojer Strap 3. You can also find this information in the Woojer Strap 3 User Manual.
You can find additional information about how to connect to various source devices (like PCs, mobile devices, gaming consoles, VR headsets and more) by referring to the Woojer Strap 3 section on our support portal.
Most, if not all options presented in this guide are also easily accessible through the dedicated Woojer app, which is available here.
Video instructions for your Woojer are available on our Getting Started page.
We also highly recommend that you check out our Getting Started videos which are available on this dedicated page.
TABLE OF CONTENTS
- Charging the Woojer Strap 3
- Connecting to the Woojer Strap 3
- Wearing the Woojer Strap 3
- Fine Tune your Woojer Strap 3
Charging the Woojer Strap 3
Before using the Woojer Strap 3 for the first time, please connect it to any standard 5v charger (like a mobile phone charger) for up to 2 hours.
Connecting to the Woojer Strap 3
The Woojer Strap 3 can be connected to an audio source device using one of the following connectivity options:
- Use an analog 3.5mm cable from the Woojer Strap 3 to your source device.
- Use a USB-C cable from the Woojer Strap 3 to your source device.
- Wireless pairing using A2DP Bluetooth.
Connecting your audio source using Bluetooth
- Press and hold the Woojer Strap 3 power button for 5 seconds. The LED indicator will begin to blink rapidly with red and blue.
- On your source device, enter your Bluetooth options and locate the "Woojer Strap 3" to initiate the pairing.
- Once paired, the Bluetooth Source indicator will change to solid blue.
Connecting your headphones
The Woojer Strap 3 can also be connected to an audio output device using the following connectivity options:
- Use an analog 3.5mm cable from the Woojer Strap 3 to your audio output device.
- Wireless pairing to Bluetooth headsets/speakers using A2DP Bluetooth.
Connecting your Bluetooth headphones
- Press and hold the Woojer Strap 3 power button AND the volume up button for 5 seconds simultaneously. The LED indicator will begin to blink rapidly with red and blue.
- Set your Bluetooth headphones into pairing mode and place them near the Woojer Strap 3.
- Both devices will pair within 30 seconds.
- Once paired, the Bluetooth Headphones indicator will change to solid blue.
Wearing the Woojer Strap 3
The Woojer Strap 3 can be worn diagonally or vertically across the chest, on your waist, or on your spine.
(Need written info about how to remove the Strap, not sure how to describe it without the product physically)
Fine Tune your Woojer Strap 3
You can control and adjust the headphone volume output, as well as the haptic response strength of the Woojer Strap 3 using the dedicated control buttons in the middle of the device.
To optimize your Woojer experience, and access additional features like audio-haptic synchronization, please launch the dedicated Woojer app.